Advertisement
•
To set Hour, Press "SET" 4 times, push the "MODE" to sequence numbers.
#
To set Minutes, Press "SET" 5 times, push the "MODE" to sequence numbers.
®
Note ; To select the hour/minute or Month/day by pressing the SET button. Then
press the Mode button to adjust the current value of the time or date.
BATTERY BACK-UP
Your dock has a battery back up feature in case of power failure.
A 9 Volt battery (not included) is required. You must put in a battery to ensure the
battery back up feature is ready in case of power failure. If power fails, the back up
battery will automatically continue operation of the clock and maintain actual time.
However, the display will not be lighted. When electrical power is restored, the display
will light up again. The battery will maintain time keeping for approximately 8 hours
during power failure or interruption.
Note : Remove the battery of the clock is to be unplugged for a long time to
avoid unnecessary battery drain.
9
Advertisement
