Advertisement
1.
AUTO/OFF/ON
SWITCH ... slide the switch to turn radio
"ON"."OFF" or to "AUTO"
position. When the switch is in the "AUTO" position, it will permit automatic turning
"ON"
and
"OFF"
of the radio according to the sleep and alarm settings.
2.
ALARM SET BUTTON.Press the button simultaneously
with the HOUR or
MIN button to set the desired wakeup time.
3.
SLEEP BUTTON.Press this button to display the number of minutes
(1:59 or
less) which the radio will sound for 1hour 59 minutes and will automatically
turn
off after then.
4.
HOUR and MIN BUTTONS.Use these buttons to set the time while
pressing.
5.
VOLUME KNOB CONTROL ... To regulate the loudness of the radio, rotates the
CONTROL to desired position. If you wish to be awakened preset time by the "Buzzer"
rotate the CONTROL clockwise until a "dick" sound is heard.
6.
TUNING KNOB.Turn this knob to the desired radio station.
7.
SNOOZE BUTTON.When you are awakened by radio or buzzer, if you wish
to sleep a few minutes more, simply touch the "snooze" button and it will shut off
the radio or buzzer for approximately 5 to 10 minutes before the radio or buzzer
sounds again this can be repeated several times.
TO SET THE TIME
Step 1 : Press the HOUR or MIN button to set the correct time.
Note : Repeat the above steps if your run past the correct time.
TO PLAY THE RADIO
Step 1 : Slide the AUTO/OFF/ON switch to "ON" position.
Step 2 : Slide the Band Switch to the desired position (AM or FM)
Step 3 ; Select the desired radio station by tuning the Tuning knob.
Step 4 : Adjust the volume to the desired listening level.
WAKE UP TO RADIO
Step 1 : Set the alarm as previously instructed.
Stej3 2 : Turn the radio ON and select the desired radio station and volume setting as
previously instructed.
Step 3 : Slide the AUTO/OFF/ON switch to "AUTO" position.
Your unit is now set to turn on automatically at the pre-selected alarm time.
Advertisement
