Download Print this page

Before You Install - Honeywell 5210 Installation Instructions Manual

Advertisement

IL42-5150E
Figure 2. Enclosure (approximate dimensions)
14.7
[373]
16.7
[424]

BEFORE YOU INSTALL

Use authorized utility procedures when installing or servicing this device. Equipment damage, personal injury, or death can
result if authorized utility procedures are not followed when installing or servicing this device. Do not install or service this
device when this device is powered on.
This device is an FCC Part 15 Class A device, and it is not intended for installation in or on a residence. See FCC Part 15 Class
A compliance on page 12.
For optimal performance of the LAN antenna, Honeywell recommends that this device be installed so that the enclosure is at
least 5 feet (1.5 meters) off the ground. Failure to meet the minimum ground clearance can result in degraded performance
of communication within the network.
Installation personnel should mount an AC disconnect prior to this device's enclosure.
This device supports different mounting options, including mounting on 18-foot (5-meter) to 35-foot (11-meter) utility poles.
While this leaflet provides general instructions, be sure to follow your utility's procedures for mounting this device at its
installation location.
8.0
[203]
Approximate dimensions in inches [millimeters]
WARNING
NOTICE
NOTICE
3

Advertisement

loading