Kenwood KRC-754 D Service Manual page 4

KRC-754 D/L
DISASSEMBLY FOR REPAIR
1. To remove the control unit and the sub panel
1. Press unit removing button @ and remove the con-
trol unit.
2. Remove screw @ and remove the top cover.
3. Remove 4 screws @, pull out flexible harness @
and remove the sub panel.
2. To remove the cassette machanism
1. Remove the connectors and flexible harnesses @,
remove 3 screws @ and remove the cassette
machanism.
3. To remove the PC board
1. Remove 4 screws @.
2. Straighten claws @ with nosed pliers and remove
the cassette machanism.