Advertisement
KRC-754 D/L
MECHANISM DESCRIPTION
EJECT
1.
2.
3.
Push the lever assembly (eject [51]) (@).
By pushing the lever assembly (eject [51]), the ten-
sion spring (103) pushes the lever (102) (@).
Though pushing the lever (102), the slide switch
(S1) is turned off, and the lever assembly (head
plate [2]) moves backward (@).
The lever assembly (eject [51]) pushes and turns
the arm (action [53]) (@).
By turning, the arm
(action [53]) pushes
up the
holder (action plate (61) (@).
When
the holder (action plate [61]) is pushed up,
the lever (reverse [121]) is pulled by the tension
spring (63) and turns (@).
In turning, the lever (reverse [121]) is put on the
lever of the mechanism chassis (122) (@).
The cassette guide (65) is pushed forward by the
torsion coil spring (66) , and the cassette tape is
ejected (@).
21
Advertisement
