Table of Contents
Advertisement
Steering Wheel Control Compatibility
SWC Introduction
Steering Wheel Control (SWC) function allows
you to operate this unit via
an external
device
(steering wheel
control).
A third-party adapter must be used in order
for this unit to be compatible with your OEM
steering wheel controls. We recommend PAC
SWC series.
This unit has a built-in 3.5mm SWC interface
that is compatible with many popular 3rd party
SWC
control
modules,
such
as PAC, METRA,
and others.
3.5mm SWC
input
(black
socket)
is located on
the
supplied
wire harness which
is
connected
to the rear of the unit.
Illustration for reference only
Programmable
Controls
The following radio/ audio function controls
are
available to be
programmed.
Source
Mute
Home
Seek
+
/ Next Track
Seek
-
/ Previous
Track
Volume+
Volume
-
Band
Phone Menu
Bluetooth Talk
Bluetooth End Call
Voice Assistant/ PTT
CD
Note
Not
all
OEM
steering
wheel
functions
may be
supported.
Specifications are
subject
to
change
without
notice.
36
SWC
Installation
/ Programming
Contact your local installation expert for the
correct SWC adapter for your specific vehicle.
1. For most SWC adapters,
select
program
using
"Pioneer/Sony/Other"
mapping order
as
described in
"Programmable
Control".
2. When programming, if a function is not
supported
(or
not
desired), then the function
MUST be
skipped
as per the SWC module
instructions.
3. The SWC function MUST be programmed
in
the correct order as per the
function
mapping
order instructions.
CD
Note
For SWC programming technical assistance, call
the
number in
your SWC instruction manual.
Advertisement
Table of Contents
