JVC KD-X200E Instruction Manual page 13

Menu operations
Menu item
DEMO
PRO EQ
FADER *1
BALANCE
BASS BOOST
LOUD
(Loudness)
VOL ADJUST
(Volume adjust)
BEEP
(Keytouch tone)
TEL MUTING *2
(Telephone
muting)
AMP GAIN
(Amplifier gain)
CLOCK SET
24H/12H
CLOCK ADJ
(Clock
adjustment)
CLOCK DISP
(Clock display)
DIMMER SET
BRIGHTNESS *4
SCROLL *5
TAG DISPLAY
*1 If you are using a two-speaker system, set the fader level to "00".
*2 This setting does not work if <BT ADAPTER> is selected for <AUX> of <SRC SELECT>.
*3
The illumination control wire connection is required. (
*4
Initial: DAY (BUTTON ZONE [25], DISP ZONE [31])/NIGHT (BUTTON ZONE [09], DISP ZONE [12])
*5 Some characters or symbols will not be shown correctly (or will be blanked) on the display.
12 | ENGLISH
Selectable setting (Initial: [XX])
For settings, page 4.
For settings, page 11.
R06 — F06 [00]: Adjusts the front and rear speaker output balance.
L06 — R06 [00]: Adjusts the left and right speaker output balance.
+01/+02: Select your preferred bass boost level.
[OFF]: Cancels.
[LOW]/HIGH: Boosts low or high frequencies to produce a well-balanced
sound at a low volume level.
OFF: Cancels.
-05 — +05 [00]: Presets the volume adjustment level of each source,
compared to the FM volume level. Before adjustment, select the source you
want to adjust. ("VOL ADJ FIX" appears if "FM" is selected.)
[ON]/OFF: Activates or deactivates the keypress tone.
ON: Mutes the sounds while using the cellular phone (not connected
through KS-BTA100).
[OFF]: Cancels.
LOW POWER: Limits the maximum volume level to 30. (Select if the
maximum input power of each speaker is less than 50 W to prevent
damaging the speakers.)
[HIGH POWER]: The maximum volume level is 50.
For settings, page 4.
For settings, page 4.
[AUTO]: The built-in clock is synchronized with the Clock Time (CT) data
received from the FM Radio Data System station.
OFF: Cancels.
ON/[OFF]: Activates or deactivates clock display when the unit is turned
off.
Selects the display and button illumination adjusted in the <BRIGHTNESS>
setting.
[AUTO]: Changes between the Day and Night adjustments when you turn
off/on the car headlights. *3
ON: Selects the Night adjustments.
OFF: Selects the Day adjustments.
DAY/NIGHT: Brightness settings for the display and button illumination for
day and night.
BUTTON ZONE/DISP ZONE: Sets the brightness levels 00 — 31.
[ONCE]: Scrolls the display information once.
AUTO: Repeats scrolling (at 5-second intervals).
OFF: Cancels.
[ON]: Shows the TAG information while playing MP3/WMA/WAV tracks.
OFF: Cancels.
page 19)