Advertisement
IMPORTANT SAFETY INSTRUCTIONS
If food sticks to the wall of the blender jar, switch off the appliance and
12.
unplug it. them use a spatula to remove the food from the wall.
Never fill the blender jar with ingredients hotter than 80°C.
13.
The appliance can only be switched on if the blender jar or the beaker is
14.
assembled on the motor unit correctly.
15.
Do not let the appliance run for more than 2 minutes (Mill:30 seconds) at
a time. let the appliance cool down to room temperature before you
continue processing.
If the supply cord is damaged, it must be replaced by the manufacturer,
16.
its service agent or similarly qualified persons in order to avoid a hazard.
SAVE THESE INSTRUCTION.
THIS UNIT IS INTENDED FOR HOUSEHOLD USE ONLY.
Caution:
Ensure that the blender is switched off before removing
Caution:
The failure to follow any of the important safeguards and the important
instructions for safe use is a misuse of your table blender that can void
your warranty and create the risk of serious injury.
Safety feature
This blender is fitted with a safety feature which safeguards against
excessive loads. In case of overloading. the blender automatically activates
the protection and operation will stop. if ths occurs, set the rotary knob to
OFF, unplug the appliance and allow it to cool down for 15 minutes. remove
the ingredients and clear up the blender jar before starting operation.
2
Advertisement
