Mitsubishi Electric MUZ-LN25VG-E1 Service Manual page 80

13-2.MUZ-LN25VG2 -
NOTE: Turn OFF the power supply before disassembly.
OPERATING PROCEDURE
1. Removing the cabinet
(1) Remove the screws fixing the service panel.
(2) Pull down the service panel and remove it.
(3) Disconnect the power supply cord and indoor/outdoor
connecting wire.
(4) Remove the screws fixing the top panel.
(5) Remove the top panel.
(6) Remove the screws fixing the cabinet.
(7) Remove the cabinet.
(8) Remove the screws fixing the back panel.
(9) Remove the screws of the terminal block support and
the back panel.
(10) Remove the back panel.
Photo 2
Screw of the cabinet
Screws of the cabinet
OBH767G
, , MUZ-LN35VG2 -
ET2 ER2 E3
Direction to
remove
Hooks of
the service
panel
, ,
ET2 ER2 E3
PHOTOS/FIGURES
Photo 1
Screws of the top panel
Screws of the cabinet
Photo 3
Screws of the terminal block support and the back panel
80
Screws of
the top panel
Back panel
Screw of
the service
panel
Service panel
Ambient temperature
thermistor
Screws of
the back panel