Page 1
Textures Tilly Kettle Model No. WK8290CH Care & Instruction Manual For household and indoor use only Please read these instructions before use and retain for future reference...
ELECTRICAL SAFETY • You should only plug the appliance into a 220V‐240V AC, 50Hz supply. Connecting it to other power sources may damage the appliance and will invalidate the guarantee. • Switch off and unplug when not in use and before cleaning the appliance.
Page 4
• This appliance must be plugged in to an earthed socket outlet. WARNING! • This appliance is intended exclusively for use in domestic households. It is not suitable for commercial use. • Do not open the lid while the water is boiling or when steam is coming out of the kettle.
Page 5
PARTS Lid Button Filter Handle Body Switch Water Gauge Base Issue 1 18/05/2023...
Page 6
TO USE 1. Place the kettle on a stable, flat, heat resistant surface and away from surfaces that may be damaged by steam. 2. Fully unwind the cable and plug in. For safety do not allow the cable to dangle over the edge of units. 3.
Page 7
CLEANING To maximize the efficiency of the kettle, clean and descale it regularly. 1. Switch off, unplug the kettle and allow it to cool completely. 2. Press the lid button to open the lid and press the filter down with both hand in the inclined direction as below (Fig. 1). Fig.
Need help?
Do you have a question about the Textures Tilly and is the answer not in the manual?
Questions and answers