Table of Contents
Advertisement
Identifying the Operational Parts
Remote Commander
[|] COMMAND MODE selector
To remotely control the VCR with the Commander, set
this selector to the same position as that on the VCR.
Usually set both selectors to VTR 3.
Change the position as shown below to control other
Sony VCRs.
VTR 1: For Sony Betamax VCRs
VTR 2: For Sony 8mm format VCRs
VTR 3: For Sony VHS format VCRs
INPUT SELECT button
Press to select the sources to be recorded.
The selected input mode indicator appears in the
display window.
[3] REC MODE button
Press to select the recording tape speed, SP or EP.
[4] Menu operation buttons
Press MENU to display or erase the main MENU.
Press </P»/A/¥ to move the cursor or change the
setting and press EXECUTE to store the setting.
5| FUNCTION MEMORY button
Press to execute one of the sequential tape
operations in the FUNCTION
MEMORY
menu
assigned to this button.
10
[6]
ANT TV/VTR (Antenna TV/VTR) button
Press to light the VTR indicator in the display window
to watch the playback picture or the TV program
selected on the VCR. When you want to watch a TV
program while the VCR is in use, press this button
again to turn off the VTR indicator. This button is
effective when your TV is connected to the VCR via
the VHF antenna terminal only.
POWER switch
TVIVTR selector
Set to TV when you use the supplied Commander to
operate a TV and to VTR to operate a VCR.
DATA SCREEN button
Press to erase or display the on-screen display.
COUNTER
RESET button
Press to reset the counter number to OHOOMOOS.
Channel number and ENTER buttons
Press the appropriate button(s) and ENTER to select
the channel directly.
For example, to select channel 10, press 1, 0 and
ENTER or to select channel 4, press 4 and ENTER.
Advertisement
Table of Contents
