Table of Contents
Advertisement
Allows you to watch the screen in various picture formats: Auto / 16:9
/ 4:3.
Select the input source: VGA / HDMI.
12
Auto Adjust
Automatically adjust the horizontal / vertical location,
focusing and clock of pictures. (VGA signal only)
Auto Colour
Adjust the white balance of picture. (VGA signal only)
Gamma
When using the Gamma 1, and Gamma 2 monitor
settings, higher gamma settings mean a brighter image
is displayed and vice versa.
Clock
To obtain the correct width of the input signal by
adjusting the frequency. Used to minimize
the vertical bars that appear because of an incorrect
width. (VGA signals only)
Phase
Used to optimize screen performance by adjusting the
phase. (VGA signals only)
Language
Allows you to select your desired on screen menu
language. The default is English.
Power Off
Select ON if there's no singal input, the unit will
automatically switch from standby mode to off mode
after 1 minute. The LED light also stop flashing. The
default is Off.
Timer Off
The unit will automatically switch to standby mode 4
hours after the last time was used. A reminder screen
will pop up and count down before the unit switches to
standby mode. The default is On.
Reset
Select YES to restores the default factory settings.
Select NO to cancels the reset.
Advertisement
Table of Contents
