LG SKSFD3613 Series Owner's Manual page 26

us_main.book.book Page 26 Wednesday, September 23, 2020 1:25 PM
26 OPERATION
NOTE
• To change the temperature mode from °F to °C (or vice versa) press and hold the Refrigerator button
for approximately five seconds. The temperature indicator on the display window switches between
Celsius and Fahrenheit.
• The displayed temperature is the target temperature, and not the actual temperature of the refrigerator.
The actual refrigerator temperature depends on the food inside the refrigerator.
f
Ice Plus
This function increases both ice making and freezing capabilities.
Press the Ice Plus button to illuminate the icon and activate the function for 24 hours. The function
automatically shuts off after 24 hours. Stop the function manually by pressing the button once more.
g
Water Filter
Replace the water filter when the
Water Filter button for three seconds to turn the icon off. Replace the water filter approximately every
six months.
h
Lock
The lock function disables every other button on the display.
• When power is initially connected to the refrigerator, the lock function is off.
• To lock the control panel buttons, press and hold the Lock button until the indicator appears in the
display and the function is activated.
• To disable the function, press and hold the Lock button for approximately three seconds.
i
Water & Ice Type
Select the desired dispenser mode from the buttons on the dispenser control panel. Press the
dispenser switch with a glass or other container to dispense cubed ice, water or crushed ice.
NOTE
• This appliance incorporates an earth connection for functional purposes only.
• When the refrigerator is in the Power Saving Mode, the display remains off until a door is opened or a
button is pressed. Once on, the display remains on for 20 seconds.
Changing the Craft Ice Mode
NOTE
• This feature is only available on some models.
• The Freezer button can also be used to set the Craft Ice mode to either 3 ICE or 6 ICE. The default mode
is 3 ICE.
1
Touch any button on the control panel to activate it.
2
Press and hold the Freezer button for 3 seconds until the control panel beeps and the current ice
mode appears.
h
icon turns on. After replacing the water filter, press and hold the