Installation Instructions; 29.2 General Installation Instructions - NEFF C29MS3A 0 Series User Manual And Installation Instructions

Table of Contents

Advertisement

Recommended settings for cooking food using the microwave
Food
Recommended settings for cooking in combination with the microwave
Food
29  Installation instructions
I n s t a l l a t i o n i n s t r u c t i o n s
29.1 Scope of delivery
After unpacking all parts, check for any damage in
transit and completeness of the delivery.
Depending on the appliance configuration, different
handles and panels can be used. An example is shown
in the picture.
 29.2 General installation instructions
Follow these instructions before you start in-
stalling the appliance.
¡ The installation cabinet must not have a
back panel behind the appliance. There
should be a gap of at least 35 mm
between the wall and the cabinet base as
well as the rear panel of the cabinet situ-
ated above.
¡ Ventilation slots and intake openings must
not be covered.
¡ The safe operation of this appliance can
only be guaranteed if it has been installed
to a professional standard in accordance
Accessory/cook-
Shelf pos-
ware
ition
Accessory/cook-
Shelf pos-
ware
ition
Heating
Temperature in
function
°C
Heating
Temperature in
function
°C
with these installation instructions. The in-
staller shall be liable for damages incurred
as a result of incorrect installation.
¡ Check the appliance for damage after un-
packing it. Do not connect the appliance if
it has been damaged in transit.
¡ Before starting up the appliance, remove
any packaging material and adhesive film
from the cooking compartment and the
door.
¡ Proceed in accordance with the installation
sheets for installing accessories.
¡ Fitted units must be heat-resistant up to
95 °C, and adjacent unit fronts up to
70 °C.
¡ Do not install the appliance behind a decor-
ative door or the door of a kitchen unit.
There is a risk of overheating.
¡ Cut-out work on the units should be carried
out before installing the appliance. Remove
any shavings. Otherwise, the correct opera-
tion of electrical components may be ad-
versely affected.
¡ The mains socket for the appliance must
either be located in the hatched area
outside of the area where the appliance is
installed.
Any unsecured units must be secured to
the wall using a standard bracket ⁠ .
Installation instructions en
Microwave
Cooking
power setting
time in
in W
mins
Microwave
Cooking
power setting
time in
in W
mins
or
37

Advertisement

Table of Contents
loading

Table of Contents