Table of Contents
Advertisement
Phenomena that may be easy to be mistaken for machine defects (continued)
Phenomenon
Cases not involving a machine defect
The FREEZE function is working.
FREEZE
Color settings are not correctly adjusted.
COLOR SPACE setting is not suitable.
The brightness and/or contrast are adjusted to an
The projector is operating in Eco mode.
The lamp is approaching the end of its product lifetime.
When the internal temperature is high (even if the
ambient temperature is lower than 35°C), the brightness
of lamp might be reduced automatically.
Either the focus and/or horizontal phase settings are
not properly adjusted.
The projection window is dirty or misty.
may appear on screen.
The OVER SCAN ratio is too big.
The FRAME LOCK function cannot work on the current
input signal.
FOCUS
Troubleshooting
Reference
page
31
44
37
51
102
105
51
41
44
46
115
Advertisement
Table of Contents
