Advertisement
All Menus : All menus (MAIN, SOUND, PICTURE, SETTINGS, INSTALLATION)
are invisible.
OSD Disable = Disable Setup Menus
: Only SETUP menus are invisible.
Invisible Setup Menus are:
Main menu: Installation, Channel list
Settings menu: Parental, Sources, Other settings
Teletext
Enables (Teletext = On) or prohibits (Teletext = Off) the use of teletext (or MHEG if available)
WakeUp Time Channel
Wakeup time alarm is activated if the time of last played service is same to selected time but if this
entry is chosen an available service then only that service's time information will be used. If default
behaviour (first one) is requested then keep the value as "0".
Wakeup Time Volume
To modify the volume of tv wake up volume ( It cant be set higher volume than volume limit).
Copy To USB
There are two steps and both are independent from each other.
For welcome image downloading to USB, there should be DownloadWelcomeScreen.mb82 file in USB
ROOT.
Copy the updated welcome image to USB in directory "welcome_image" as "hotel_wel.png"
Copy NVRAM data (service list, preferences, etc.) to USB device. On Phonix platform, all nvram data
is stored in 8x32KB Flash files named as "nvblock_ ... .bin". When Copy to USB is called, those files
are copied from TV to USB. Then they can be used for various purposes testing on another TV or
testing/debugging on observatory etc. Note that USB should be plugged before this operation.
A new folder will be created in the USB with every operation of "Copy To USB". Folder names will
automatically increase like CLONE00001, CLONE00002, etc. (up to 99999)
Copy From USB
Firstly, you will see the directory list of your USB if it is connected. All operations will start after you
select one of this folders. The selected folder could also be the root folder. For Copy-From-USB
operation, there are two steps and both are independent from each other.
If there is file named "hotel_wel.png" in the folder "welcome_image" in the USB directory you selected,
it is copied to tv to use as welcome image. The selected directory can be the root or the one created
by user in the USB.
Advertisement
