Toshiba 40L7363D Service Manual page 118

Subject:
Product Engineering Specification
BK.01191.001
Project Code:
B191-203
Model Name:
12Va
3.7 Output Overshoot & undershoot
Less than + / - 5% of nominal value.
3.8 Dynamic Load Regulation
Less than + / - 5% of nominal value.
The voltage shall remain within the 10% regulation when loading change from 10%-50%-100% load with
slew rate 0.05A/μs and 200Hz with duty 50%. The capacitor load is 2200uF.
3.9 Output Voltage Rise Time
Rise time @ cold start-up
Output voltage
12V
12Va
Remark: The output voltages shall rise from 10% to 90% of their output voltage
4. Output Protections
4.1 Over Voltage Protection
Output voltage
12V
12Va
Remark: All output should be max load and LED full dimming while this protection was testing.
Form No.:A-01-001-09(111107)
過期處置:背面紙
>20ms
230Vac input
>20mS
>20mS
Specification
5V < 9V
< 18V
< 18V
保存期限:最新狀態
Part No.:
Doc. No.:
TV SET
Condition
Max load
Max load
Over Voltage Protection
Status
Shut down and Auto recovery
Latch
Latch
Release Notice
Rev.: 4
BK.01191.203
201-C005
Page 6 of 15
保存單位:eGRNSystem