Table of Contents
Advertisement
1. ENTERING TO DESIGN MODE
1) Select the Service mode.
S
1
JW9_039
4
When QA02 is initialized, item "OPT3" of DESIGN MODE is set to the data of the representative model of this chassis family.
Therefore, because ON-SCREEN specification remains in the state of the representative of model. This model is required to
reset the data of item "OPT3".
2. SELECTING THE ADJUSTING ITEMS
Every pressing of CHANNEL t button in the design mode changes the adjustment items in the order of table-3.
(s button for reverse order)
Refer to table-3 for data of design mode.
(See SETTING & ADJUSTING DATA on page 27)
3. ADJUSTING THE DATA
Pressing of VOLUME s or t button will change the value of data.
DESIGN MODE
2) While pressing CALL button on Remote
and press MENU button on TV.
(Design mode)
2
3
5
6
7
18)
Press
D
Press
Version information of
microprocessor
Main tuner information
Sub tuner information
Selectable picture information
Position information
Signal information
Screen size information
Sound system information
Scan mode information
8
9
- 9 -
3) The following displays
are shown on the screen
JW9_039
Advertisement
Table of Contents
