Philips HTS3520/12 Service Manual page 34

Mechanical and Dismantling Instructions
Dismantling Instruction
Step5: Dismantling Loader, disconnect the 3 connectors (XP12, XP13, XP14) aiming in the below figure, and remove 2 screws
that connects the loader and the bottom cabinet. (Figure 5)
Dismantling the Turn Knob assembly, pls refer to below instruction. (The last steps of Figure 5)
Step6: Dismantling Main Board, first disconnect 3 connectors (XP1, XP10, XP11), and then remove 8 screws. (Figure 6)
Step7: Dismantling Power Board, disconnect the connectors XS703 and CON501 then remove 4 screws. (Figure 6)
Step8: Dismantling Amplifier Board, remove 8 screws from the PCB. (Figure 6)
3-3
Detailed information please refer to the model set.
Figure 5
Figure 6