Atc (Auto Temperature Control) - Samsung WA52J8060A Series User Manual

Washing a load of laundry
,
Press Start/Pause and the wash will
begin. The process indicator will light up
and the remaining time for the cycle will
appear in the display.
Pause Option
To remove or add laundry items, follow
these steps:
1, Press Start/Pause to unlock the lid.
NOTE
The lid cannot be opened when the water is
too HOT.
2, Remove or add laundry items.
3, Close the lid, and then press Start/Pause
to restart the wash.
NOTE
If you have Child Lock on, you must
deactivate it first. See page 33.
When the cycle is finished:
After the total cycle has finished, the power
will turn off automatically.
1, Open the lid.
2, Remove laundry.
.aT(::(Auto Temperature Control)
ATC is the control function that the
washer controls water temperature with
temperature sensor (thermistor).
NOTE
Because there are numerous water
temperatures depending on the customer's
environments (cold areas, warm areas,
various water temperatures, settings of
heater temperature, etc.), ATC function in our
washer maintains the certain level of wash
temperature to output the best washing
performance at each cycle.
NOTE
If you select NORMAL cycle, this cycle is the
regulation and UL cycle. Since new washers
must reduce the amount of energy usage as
a first priority, customers will notice more
cold water entering the washer. But, this is
normal, not a problem.
In those regulation cycles, Hot temperature
is similar to acceptable adult bath-water
temperature and warm temperature is
similar to comfortable swimming-pool water
temperature.
38 English
WAS000J WA8700J _\TA52J 03133Y 01 ENindd 38 2015/4/20 15:33:50