Basic Location Requirements !6 - Samsung WA52J8060A Series User Manual

Hide thumbs Also See for WA52J8060A Series:
Table of Contents

Advertisement

Available languages

Available languages

Installation
Basic location requirements
Electrical
!20 Volt 60 Hz !5 AMP fuse or circuit
breaker.
Individual
branch circuit serving only
your Washer is recommended.
Your washer is equipped with a power
cord.
/!X, CAUTION
Never use an extension
cord.
Grounding
Electrical grounding
is required for this
appliance.
This appliance must be grounded.
In
the event of malfunction
or breakdown,
grounding
will reduce the risk of electric
shock by providing
a path of least resistance
for electric current.
This appliance is equipped with a power
cord having a three-prong
grounding
plug
for use in a properly
installed and grounded
outlet.
The plug must be plugged into an
appropriate
outlet that is properly
installed
and grounded
in accordance with all local
codes and ordinances.
z_
WARNING
An improperly
connected equipment-
grounding
conductor can increase the risk
of electrical shock. Check with a qualified
electrician
or serviceman
if you are not sure
whether the appliance
is properly
grounded.
Do not modify
the plug provided
with the
appliance-
if it does not fit the outlet, have
a proper outlet installed by a qualified
electrician.
Important
safety precautions
To prevent unnecessary risk of fire,
electrical
shock or personal injury, all wiring
and grounding
must be done in accordance
with the National Electrical Code ANSI/
FNPA, No.70 Latest Revision and local
codes and ordinances. It is the personal
responsibility
of the appliance owner to
provide
adequate electrical
service for this
appliance.
/_
CAUTION
Never connect the ground wire to plastic
plumbing
lines, gas lines, or hot water pipes.
Water
To correctly fill your Washer in the proper
amount of time, water pressure of 20 to
!16psi
(!37 to 800kPa) is required.
Water pressure less than 20 psi may cause
water valve failure, or may not allow the
water valve to shut off completely,
or may
extend the fill time beyond what your
Washer controls allow, causing your Washer
to turn off. A time limit is built into the
controls to prevent flooding
in your home if
a hose becomes loose.
16
English
WAS000LWA8700J
WA52J
0f_lltf_Y
01 ENJndd
16
2015/4/2(/
15:1tf_:42

Advertisement

Chapters

Table of Contents
loading

Table of Contents