Sans Digital MobileRAID MR8UT6G User Manual page 11

3. Press and hold the Reset button(Fig. 14).
Reset button
4. Switch on the 8 bay RAID Enclosure with the Reset button held, and then release the
reset button after the unit is on for 5s to complete the RAID mode configuration (Fig.15).
Fig.15
NOTE :
The minimum hard drives used is two. The two HDDs are insert into
•
position 1 and 5 respecively.
If change the RAID mode, must change it to "Normal" mode firstly,
•
then set other RAID mode.
Fig.14
On/off button
- 11 -