Table of Contents
Advertisement
Approvals
Approvals issued
Note
Issued approvals on the type plate of the device
The specified approvals apply only when the corresponding mark is printed on the product. You
can check which of the following approvals have been granted for your product by the markings
on the type plate.
Current approvals on the Internet
You will find the current approvals for the product on the Internet pages of Siemens Industry
Online Support at the following link:
15984/cert)
Installation guidelines
The devices meet the requirements if you adhere to the installation and safety instructions
contained in this documentation and in the following documentation when installing and
operating the devices.
• "Industrial Ethernet / PROFINET Industrial Ethernet" System Manual
support.industry.siemens.com/cs/ww/en/view/27069465)
• "Industrial Ethernet / PROFINET - Passive Network Components" System Manual
support.industry.siemens.com/cs/ww/en/view/84922825)
• "EMC Installation Guidelines" configuration manual
support.industry.siemens.com/cs/ww/en/view/60612658)
Personal injury and property damage can occur
The installation of expansions that are not approved for products or their target systems may
violate the requirements and regulations for safety and electromagnetic compatibility.
Only use expansions that are approved for the system.
SCALANCE M812, M816
Operating Instructions, 11/2023, C79000-G8976-C343-09
WARNING
(https://support.industry.siemens.com/cs/ww/en/ps/
(https://
9
(https://
(https://
71
Advertisement
Table of Contents
