Advertisement
Available languages
Available languages
Cord shaving
If you insert the appliance plug to the shaver and plug in the
adaptor into a household outlet, you can use it even if the battery
capacity is low.
•
If the shaver does not work, continue charging it for approx. 1
minute.
Reading lamps when charging
While charging
ES‑LT50
The charge status lamp (
The number of the battery capacity lamp
will increase as charging progresses.
After charging is completed
ES‑LT50
All the battery capacity lamps will light up
and then turn off after 5 seconds.
ES‑LT20
) glows.
The charge status
lamp (
) glows.
ES‑LT20
All lamps turn off.
•
Recommended ambient temperature for charging is 15‑35 °C.
The battery may degrade the performance or may not charge
under extreme low or high temperatures. The charge status lamp
(
) will blink when there is a problem with charging.
•
When charging the shaver for the first time or when it has not
been in use for more than 6 months, the charge status lamp (
may not glow. It will eventually glow if kept connected.
Shave
Using the shaver
1
1
Rotate the lock
ring and press the
power switch.
Page 3
Start out shaving by applying gentle pressure to your face.
Stretch your skin with your free hand and move the shaver back
and forth in the direction of your beard. You may gently increase
the amount of pressure as your skin becomes accustomed to
this shaver. Applying excessive pressure does not provide a
closer shave.
2
2
Hold the shaver as
illustrated above and
shave.
)
Advertisement
