Advertisement
DISMANTLING INSTRUCTIONS
Dismantling of the Cassette Cover
2. Twist screw driver
3. Lift up and out
1. Place screw driver
(flat side) between
the cassette cover
& cassette door
Remove Cassette Cover
Dismantling of the CDC Module and Front Panel
1) Loosen 16 screws to remove the Cabinet Rear (pos 259)
of the set :-
-
5 screws each on the left side & right side of the
Cabinet Rear.
-
6 screws at the rear of the Cabinet Rear.
2) Slide out the CDC Tray as shown in the diagram below with
the help of a flat head screw driver.
3-1
Cassette Cover
Sliding Out The CDC Tray
Dismantling of the CDC Module and Front Panel
3) Remove the Cover Tray CDC (pos 106) as indicated.
4) Loosen 2 screws A and 2 screws B to remove the CDC
Module (pos 1104) as indicated.
5) Remove 1 screw (pos 305) at the bottom to separate the
Front Panel Assembly from the Plate Bottom (pos 236).
3-1
Remove Cover Tray CDC
Front View CDC
Remove CDC Module
Advertisement
