Table of Contents
Advertisement
The
line voltage available at the AC wall outlet
may
differ
from
one
area
to another.
While
models exported to the U.S.A., Canada,
Europe,
and
Australia
are preset prior to shipment, you
should check the voltage selector setting before
the unit is plugged in. The voltage settings avail-
able are — 110, 130, 220, and 240V.
(The 150V
and 260V
positions are not internally connected.)
If the line voltage selector plug is properly set,
МАНА 5
make sure the SY-1 power switch is "off",
The
power cord may now be plugged in. When inter-
connecting the SY-1 to a companion unit (or any
other comparable
inter-connecting of devices), it
is advisable
that the
units be either
"off"
or
unplugged.
This precludes any chance of shock
hazards
or
high
level transient
signals that can
cause
equipment
damage.
Advertisement
Table of Contents
