Advertisement
Fold up the hinged flap (Fig. 2) over the sprocket wheel, and you are ready to load
the film. When inserting the fresh cassette -
preferably in subdued light -
fully pull
out the rewind knob. When the cassette is in position, push the knob back, turning
it slightly at the same time so that it engages the core of
the
cassette spool (Fig.
3).
Now guide the narrow tongue at the beginning of the film into the slit of the take-up
spool. Push in the film up to the second perforation hole, hooking the small tooth of
the spool into the perforation to anchor the film.
FIGURE 3
Advertisement
