Dell Inspiron 5400 2n1 Service Manual page 61

Table 12. System setup options—Power Management menu (continued)
Power Management
Wake on LAN
Intel Speed Shift Technology
Lid Switch
Power On Lid Open
Table 13. System setup options—Wireless menu
Wireless
Wireless Device Enable
Table 14. System setup options—POST Behavior menu
POST Behavior
Numlock Enable
Enable Numlock
Fn Lock
Lock Mode
Warnings and Errors
Enable Adapter Warnings
Enable Dock Warning Messages
Fastboot
Extend BIOS POST Time
Default: OFF
Enables or disables the computer to turn on by a special LAN signal.
Default: Disabled
Enables or disables the Intel Speed Shift Technology support. Setting this option to
enable allows the operating system to select the appropriate processor performance
automatically.
Default: ON
Enables the computer to power up from the off state whenever the lid is opened.
Default: ON
Enable or disable internal WLAN/Bluetooth devices.
By default, WLAN is selected.
By default, Bluetooth is selected.
Enables or disables Numlock when the computer boots.
Default: ON
Enables or disables the Fn lock mode.
Default: ON
Default: Lock Mode Secondary. Lock Mode Secondary = If this option is selected, the
F1-F12 keys scan the code for their secondary functions.
Selects an action on encountering a warning or error during boot.
Default: Prompt on Warnings and Errors. Stop, prompt, and wait for user input when
warnings or errors are detected.
NOTE: Errors deemed critical to the operation of the computer hardware
will always halt the computer.
Enables or disables the computer to display adapter warning messages when
adapters with too little power capacity are detected.
Default: ON
Enables or disables dock warning messages.
Default: ON
Configures the speed of the UEFI boot process.
Default: Thorough. Performs complete hardware and configuration initialization during
boot.
Configures the BIOS POST (Power-On Self-Test) load time.
Default: 0 seconds
System setup 61