Dell Inspiron 5400 2n1 Service Manual page 56

Table 4. System setup options—Boot Configuration menu (continued)
Boot Configuration
Enable UEFI Network Stack
UEFI Boot Path Security
Table 5. System setup options—System Configuration menu
System Configuration
Date/Time
Date
Time
Storage Interface
Port Enablement
SATA Operation
Drive Information
Enable SMART Reporting
Enable Audio
Enable Microphone
Enable Internal Speaker
USB Configuration
Thunderbolt Adapter Configuration
Enable Thunderbolt Technology Support
Enable Thunderbolt Boot Support
EnableThunderbolt (and PCIe behind TBT)
pre-boot modules
Miscellaneous Devices
56 System setup
Enables or disables UEFI Network Stack.
Default: ON
Enables or disables the system to prompt the user to enter the Admin password
when booting a UEFI boot path from the F12 boot menu.
Default: Always Except Internal HDD
Sets the computer date in MM/DD/YYYY format. Changes to the date take effect
immediately.
Sets the computer time in HH/MM/SS 24-hour format. You can switch between 12-
hour and 24-hour clock. Changes to the time take effect immediately.
Enables the selected onboard drives.
Default: ON
Configures operating mode of the integrated SATA hard drive controller.
Default: RAID On. SATA is configured to support RAID (Intel Rapid Restore
Technology).
Displays the information of various onboard drives.
Enables or disables Self-Monitoring, Analysis, and Reporting Technology (SMART).
Default: OFF
Enables or disables all integrated audio controller.
Default: ON
Enables or disables microphone.
By default, Enable Microphone is selected.
Enables or disables internal speaker.
By default, Enable Internal Speaker is selected.
Enables or disables booting from USB mass storage devices such as external hard
drive, optical drive, and USB drive.
By default, Enable USB Boot Support is selected.
By default, Enable External USB Ports is selected.
Enables or disables Thunderbolt Technology Support.
Default: ON
Enables or disables Thunderbolt Boot Support.
Default: OFF
Enables or disables to allow or disallow PCIe devices to be connected through a
Thunderbolt adapter during pre-boot.
Default: OFF
Enables or disables various onboard devices.