3-14. MAIN BOARD (DZ750K)
Attaching the two radiation sheets
on the IC MAIN board first, and then
attach the heatsink (AMP).
heatsink (AMP)
radiation
sheets
IC on the
MAIN board
Clamp the harnesses with a lead pin or a similar tool so that
they do not touch this screw and the heatsink (AMP).
heatsink
lead pin
harness
(AMP)
Clamp the harness with a lead pin
or a similar tool so that they do not
touch the heatsink (AMP).
heatsink (AMP)
harness
lead pin
qg wire (flat type) 21core (CN605)
qh wire (flat type) 11core (CN4302)
7 two screws (+BV 3 × 10)
1 connector
4p (CN3002)
harness
lead pin
screw
heatsink
(AMP)
harness
(D.C. fan)
qs connector
6p (CN1201)
qd wire (flat type)
5core (CN1202)
wa seven screws
(+BV 3 × 6)
qf connector
12p (CN906)
HCD-DZ555K/DZ556KB/DZ750K
8 screw (+BVTP 3 × 12)
9 heatsink (AMP),
HEATSINK B board,
HEATSINK A board
q; two radiation sheet
5 three screws (+BV 3 × 6)
6 bracket (DIAT DS)
3 connector
2p (CN901)
qa wire (flat type) 24core (CN1101)
ws MAIN board
qk wire (flat type) 5core (CN702)
qj wire (flat type) 21core (CN502)
4 INSURATOR
board
2 two SUPPORT boards
•
Abbreviation
SP : Singapore model
(DZ750K: SP)
w; screw
(+BVTP 3 × 8)
ql screw
(+BVTP 3 × 8)
21