Huawei RIO-L01 Quick Start Manual page 21

Hide thumbs Also See for RIO-L01:
Table of Contents

Advertisement

(Directive 2006/66/EC). For up-to-date information about REACH and
RoHS compliance, please visit the web site
http://consumer.huawei.com/certification.
EU regulatory conformance
Body worn operation
The device complies with RF specifications when used at a distance of
1.5 cm from your body. Ensure that the device accessories, such as a
device case and device holster, are not composed of metal
components. Keep the device away from your body to meet the
distance requirement.
Certification information (SAR)
This device meets guidelines for exposure to radio waves.
Your device is a low-power radio transmitter and receiver. As
recommended by international guidelines, the device is designed not
to exceed the limits for exposure to radio waves. These guidelines
were developed by the International Commission on Non-Ionizing
Radiation Protection (ICNIRP), an independent scientific organization,
and include safety measures designed to ensure the safety of all
users, regardless of age and health.
The Specific Absorption Rate (SAR) is the unit of measurement for the
amount of radio frequency energy absorbed by the body when using
a device. The SAR value is determined at the highest certified power
level in laboratory conditions, but the actual SAR level during
operation can be well below the value. This is because the device is
designed to use the minimum power required to reach the network.
The SAR limit adopted by Europe is 2.0 W/kg averaged over 10 grams
of tissue, and the highest SAR value for this device complies with this
limit.
The highest SAR value reported for this device type when tested at
the ear is 1.44 W/kg, and when properly worn on the body is
0.56 W/kg.

Advertisement

Table of Contents
loading

Table of Contents