16 INSTALLATION
Removing Freezer Door
This feature is only available on some models.
Before beginning, make sure you completely
remove the refrigerator door. See Removing the
Refrigerator Door.
WARNING
• Use two or more people to remove and install
the freezer door. Failure to do so can result in
back or other injury.
• When you lay the door down, be careful not to
damage the floor.
• Do not sit or stand on the freezer door.
• To prevent accidents, keep children and pets
away from the door. Do not leave the door open.
1
Use a 1/4 in. (6.35 mm) hex socket wrench to
loosen and remove the hinge pin
middle hinge bracket
mm) socket wrench to remove the two bolts
. Remove the screw
d
and set the middle hinge and other parts
aside.
2
Carefully lift up the freezer door. Remove and
place it on a non-scratching surface.
from the
c
. Use a 13/32 in. (10
a
and the washer
,
b
e
Assembling Freezer Drawers
This feature is only available on some models.
1
Pull out both rails simultaneously until they
are fully extended.
2
Grasp the drawer on each side and hook the
drawer supports into the rail tabs located on
both sides.
CAUTION
• Do not hold the handle when removing or
replacing the drawer. The handle may come off,
causing personal injury.
3
Lower the door into its final position and
insert the screws in the rails on both sides.