Advertisement
4.
What is Arduino
Arduino
®
is an open-source prototyping platform based in easy-to-use hardware and software. Arduino
are able to read inputs – light-on sensor, a finger on a button or a Twitter message – and turn it into an output
– activating of a motor, turning on an LED, publishing something online. You can tell your board what to do by
sending a set of instructions to the microcontroller on the board. To do so, you use the Arduino programming
language (based on Wiring) and the Arduino
Surf to
www.arduino.cc
5.
Overview
1
IN-
2
IN+
3
OUT+
4
OUT-
5
output voltage adjustment
REMARKS:
Connect only as indicated to avoid damaging the module.
o
Install a heat sink (not included) if more than 10 W is applied.
o
This module does not feature a short-circuit protection. A prolonged short-circuit may damage the
o
module.
input voltage ........................................................................................................ 3-40 VDC
output voltage ................................................................................................. 1.25-35 VDC
max. input current ...................................................................................................... 2.5 A
chip ..................................................................................................................... LM2596S
dimensions ............................................................................................... 49 x 26 x 12 mm
© COPYRIGHT NOTICE
All worldwide rights reserved. No part of this manual may be copied, reproduced, translated or reduced to
any electronic medium or otherwise without the prior written consent of the copyright holder.
V. 01 – 08/11/2017
®
®
software IDE (based on Processing).
and
www.arduino.org
for more information.
MAKEVMA404
3
®
boards
Advertisement
