Philips 50PFL3807 User Manual page 42

IPconfiguration
In following cases, select IP configuration to set each setting as
necessary.
– When connection test failed with the setting of Connection test.
– When instructed by your Internet service provider to make specific
settings in accordance with your network environment.
3
Use ▲▼ to select IP configuration, then press OK.
4
Use ▲▼ to select a setting, then press OK.
Network selection IP setting mode
Wireless network setting IP address
IP configuration Subnet mask
Proxy configuration Default gateway
Primary DNS
Secondary DNS
MAC address
Auto
Sets the IP setting automatically.
IP setting mode
Manual
Sets the IP setting manually.
A set of numbers which are assigned to
IP address *
1, 3
devices participating in a computer network.
A mask which is used to determine what
Subnet mask *
1, 3
subnet an IP address belongs to.
IP address of the network device (such as
Default gateway *
1, 3
router) which provides Internet access.
Auto
Sets the DNS setting automatically.
DNS
setting mode
Manual
Sets the DNS setting manually.
A server which handles the name and IP
Primary DNS *
2, 3
address over the Internet.
A server which handles the name and IP
Secondary DNS *
2, 3
address over the Internet.
An address which recognizes the devices
MAC address
connecting to the network. It is also called
Hardware Address.
*1 Items can be selected only when IP setting mode is set to Manual.
*2 Items can be selected only when DNS setting mode is set to Manual.
*3 Use ▲▼ or the NUMBER buttons to input numbers. When you use
▲▼ to input numbers, then press OK or input the triple digits by using
the NUMBER buttons, the cursor moves to the next entry field. When you
use ▲▼ to input numbers, then press OK or input the triple digits by using
the NUMBER buttons at the rightmost entry field, numbers will be stored
and go back to the previous menu.
Note
• The range of input numbers is between 0 and 255.
• If you enter a number larger than 255, the number will automatically be 255.
• The manually entered number will be saved even if you change the setting to Auto.
• If you want to enter 1 or 2 digit number in one cell, press OK to move on to the next
cell.
• If the entered IP address or the default gateway or primary DNS number is same as
the default setting, IP address setting will be set to Auto. (The manually entered number
will be saved).
• When IP address setting is set to Manual, the setting of DNS setting will automatically
be Manual and when IP address setting is set to Auto, you can set either Auto or
Manual for DNS setting.
Proxyconfiguration
3
4
Network selection
Wireless network setting
IP configuration
Proxy configuration
Manual
192.168.11.3
255.255.255.0
192.168.11.1
192.168.11.1
0.0.0.0
00:12:0E:10:09:15
Proxy setting
* Items can be selected only when Proxy setting is set to Use.
• The range of input numbers for the port number is between 0 and 65535.
(If you enter a number larger than 65535, it will be regarded as 65535.)
• For proxy port, the selected ports may be blocked and not be able to use depending
on your network environment.
• If the proxy address is entered with blank only, proxy server setting will be set to
Do not use.
Connection test
Perform the following steps to test your Internet connection after you
have connected an Ethernet cable or entered network settings such as
IP address, DNS settings, etc. manually.
2
3
Testing...
4
• If the connection test passes, you are ready to use Net TV or network upgrade function
using the Internet without making any additional settings.
• If the connection test fails, check if the Ethernet cable is connected to this TV properly
or if you have entered all the required details for the wireless LAN connection properly.
Use ▲▼ to select Proxy configuration, then press OK.
Use ▲▼ to select a setting, then press OK.
Proxy setting
• Do not use is selected for default settings.
• If you need to change the proxy setting as instructed by your
Internet service provider to set the designated proxy address
and port, select Use.
Do not use Not use the proxy server.
Use
Uses the proxy server.
Selects the number or word by using
Proxy address *
▲▼◄►, then press OK.
Use ▲▼ or the NUMBER buttons to input
Proxy port *
numbers.
Note
Use ▲▼ to select Connection test, then press OK.
Press OK to select Start now.
• Connection test will start automatically and the test result will
appear right after the connection test finishes.
The test is in progress.
Pass
Connection test is successfully completed.
Fail
Connection test failed. Check the connection settings.
Press OK to go to the list of network status confirmation screen.
Note
42
English
Do not use
Continued on next page.