Use Of The Remote Control - Magnavox 50MF231D User Manual

Use of the remote control

Note: For most buttons pressing a button once will activate the function. Pressing a second time will de-activate it.
When a button enables multiple options, a small list will be shown. Press repeatedly to select the next item in the list. The list will be removed automatically
after 6 seconds or press
OK
POWER
Press to turn on/off the TV from or to
standby mode.
The TV is never powered off completely unless it is
physically unplugged.
AV
Press this button repeatedly to select the
, , ,
source -
AV1 AV2 AV3
when in TV mode, according to where you
connected the accessory devices (p. 20).
Color buttons
When functions attached to the color
buttons, the color buttons are shown on
screen.
on/off
CLOCK
Time display (for max. 10 minutes)
MENU
on/off, see p. 7.
Settings menu
Exit menu from sub-menu.
Volume
VOL
Press + or - to adjust the volume.
MUTE
Interrupt the sound or restore it.
A/CH
Press to alternate between the currently
viewed channel and the previously view
channel .
English_DFU_37131.indd 5
to remove immediately.
,
or TV
HDMI SIDE
ed
INFO
Display information
available) information about the selected TV
channel and program or accessory device.
OK
- to activate a setting
- to display the list of channels stored
(according to the selection made in the
Installation mode (Antenna or Cable), p. 8.
- starts playing content in the Home
Multimedia Browser application, p. 24.
Cursor buttons
Press the cursor buttons up/down, left/right to
navigate through the menus.
Channel selection
CH
- To browse through the TV channels or
sources stored in the preferred channel list
(see p. 19).
- To select between Antenna or Cable TV
channels, first make your selection in the
Settings menu, see, p. 7.
Note: You don't have to start the installation
again once you have searched for and stored
the available TV channels.
.
Press the dot (.) for digital channels.
5
: Press to display (when
2006-03-29 6:30:49 PM