Page 2
Bitte folgende Schritte beachten: 6. Messgerätekabel Y an X3; X an X1 der EXE 924 wieder anstecken. 1. Netzkabel entfernen. 2. Messgerätekabel markieren (Y - X). EXE 924 7. Ausgangskabel wieder anstecken. EXE 808 B 8. DIP-Schalter-Einstellungen: Die Schalter S1 und S11 müssen geschlossen 3.
Page 3
Please observe the steps below: 6. Reconnect the encoder cables to EXE 924: Y to X3; X to X1. 1. Remove the power cord. 2. Label the encoder cables (Y - X). EXE 924 7. Reconnect the output cable. 8. Settings of the DIP switches: EXE 808 B Close the switches S1 and S11;...