Operation - Philips CD 335 Manual

OPERATION
FRONT OF PLAYER
(Fig. 2)
_
1 STANDBY/ON
Switching on and off.
2 SCAN
Automatically playing the beginning of each
track.
3 SHUFFLE
Playing in random order.
4 REPEAT
Repeating play.
5 Display
Informs you about the functioning of the play¬
er.
6 NTRACKH
- Selecting another track during play.
- Selecting a track to start play with.
- Selecting tracks when compiling a programme.
- Selecting the tape length when making a tape
recording.
7
MM
SEARCH ►►
- Fast search for a passage.
- Selecting the tape length when making a tape
recording.
8 A-B
Setting the starting and stopping point of a
passage to be repeated.
9 OPEN/CL{ose)
Opening and closing the CD compartment
10 PROGRAM
- Storing tracks in a programme.
- Checking the programme.
- Erasing tracks from a programme.
11 ADV(anced) EDIT
Selecting EDIT mode to enter the tape length
when making a tape recording.
12 STOP/CP
- Stopping play.
- Erasing a programme (CM = Clear Memory).
13 PAUSE
Interrupting play.
14 PLAY/REPLAY
- Starting play.
- Returning to the beginning of a track.
DISPLAY
(Fig. 3)
_
TRACK - Indicates the track number being play¬
ed; shows how many tracks there are on the CD.
>
- Lights during play;
- Flashes when play is interrupted (PAUSE).
TIME - Indicates the elapsed playing time of the
track being played.
TOTAL TIME - Indicates the total playing time of
a disc or a programme.
PROGRAM - Lights up when a programme is be¬
ing stored.
SCAN - Lights up when the first 10 seconds of
each track are played.
SHUFFLE - Lights up when the tracks are played
in random order.
A-B - Lights up when a passage is repeated.
REPEAT - Lights up when the entire CD or a pro¬
gramme is repeated.
EDIT - Lights up when the player is put in the
EDIT mode.
ERR(or)- Lights up if you:
- make an error in operating the player;
- try to start play when the CD is inserted with
the printed side og down or if the CD is
damaged.
dISC-
Lights up if you try to start play without a
CD in the CD compartment
OPEN- Lights up when you open the CD com¬
partment.
SWITCHING ON AND OFF (STAND BY/QN)
• Press STAND BY/ON to switch the player on.
• Press STAND BY/ON again to switch the player
off.
• Remove the plug from the wall socket to
fully
switch off the player.
PLAYBACK (PLAY/REPLAY)
• Open the CD compartment by pressing
OPEN/CL(ose).
• Insert a CD in the CD compartment,
printed
side up (Fig. 4).
• Close the CD compartment by hand or by
pressing OPEN/CL(ose),
- Press PLAY/REPLAY.
- flights up and playback starts.
You can also press PLAY/REPLAY immediately
after inserting the CD; the CD compartment
then closes automatically.
- The track being played is always shown under
TRACK and its elapsed playing time is shown
under TIME.
- After the last track play stops.
- The display shows the number of tracks and
the playing time*of the CD.
You can interrupt playback by pressing PAUSE;
PAUSE then lights up and >starts flashing. Press
PLAY/REPLAY to restart.
If you press PLAY/REPLAY
during play,
the cur¬
rent track starts again from the beginning.
You can stop playback by pressing STOP/CP or
OPEN/CL(ose).
IMPORTANTl
The lens of the laser
(fig. 5)
should
never
be
touched!
6