Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Kind KD-C1000UH
Summary of Contents for Kind KD-C1000UH
- Page 1 KD-C1000UH Instructions for use Please read this manual carefully before using the machine and keep it for future reference 。 Matters needing attention When installing the device, be sure to read this safety guide carefully and follow the installation instructions strictly.
- Page 2 Keep this specification safe for future reference.。 Before connecting the switching power supply of the device to the external power supply, check the voltage of the power supply and pay attention to the control power of the device Voltage label, the voltage is DC12V. Use the device in the required temperature and humidity environment.
-
Page 3: Table Of Contents
Directory. 一、Product overview ........................4 二、Connection specification ......................5 三、Camera debugging instructions ....................6 （三）FOUCS ...........................9 （四）WB ..........................10 （五）SYSTEM ........................10 （六）COLOR ........................11 （七）IMAGE ........................11 Note: If the camera cannot be used normally or the parameters are abnormal, it is recommended to restore the default values. -
Page 4: 一、Product Overview
一、Product overview 1-inch Exmor R CMOS imager with broadcast-quality 4K images； 12x optical zoom, SRZ 4K 18x; HD 24x； Servo motor high speed head, translation/pitching speed 0.1°~300°/ s； 4K HDBaseT remote lossless image transmission and control technology； 12.4 million pixels, 3,840 × 2,160 resolution； 3G-SDI, HDMI, HDBaseT 4K video output；... -
Page 5: 二、Connection Specification
二、Connection specification The external control protocol supports RS232/RS485. The following figure shows the protocol sequence Dip switch Settings are as follows Dip 1： SW1(1-8bit) SwitchNumber Address1 Address2... -
Page 6: 三、Camera Debugging Instructions
Address3 Address4 Address5 Address6 Address7 RS232 RS485 Dip 2： SW2(1-8bit) SwitchNumber VISCA PELCO-D 2400BPS 4800BPS 9600BPS 28400BPS NORMAL TRACE The camera adopts the VISCA protocol by default, 9600 baud rate 三、Camera debugging instructions This section describes the Settings menu of the camera （一）、... - Page 7 FOUCS AUTO Focusing mode --> White balance SYSTEM --> system COLOR --> color IMAGE --> IMAGE EXPOSURE （二）、 1. Automatic mode RETURN RETURN --> EXPOSURE EXPOSURE AUTO Automatic mode GAIN GAIN SHUTTER SHUTTER IRIS IRIS BRIGHT BRIGHT EXPCOMP EXPCOMP LEVEL LEVEL 2.
- Page 8 3. Gain priority RETURN RETURN --> EXPOSURE EXPOSURE GAIN GAIN GAIN GAIN SHUTTER SHUTTER IRIS IRIS BRIGHT BRIGHT EXPCOMP EXPCOMP LEVEL LEVEL 4. SHUTTER RETURN RETURN --> EXPOSURE EXPOSURE SHUTTER SHUTTER GAIN GAIN SHUTTER SHUTTER IRIS IRIS BRIGHT BRIGHT EXPCOMP EXPCOMP LEVEL LEVEL...
-
Page 9: 三）Foucs
IRIS IRIS BRIGHT BRIGHT EXPCOMP EXPCOMP LEVEL LEVEL FOUCS （三） RETURN RETURN --> EXPOSURE EXPOSURE AUTO FOUCS FOUCS --> --> SYSTEM SYSTEM --> COLOR COLOR --> IMAGE IMAGE --> (1) autofocus RETURN RETURN --> EXPOSURE EXPOSURE AUTO FOUCS FOUCS AUTO -->... -
Page 10: 四）Wb
（四）WB RETURN RETURN --> AUTO AUTO RGAIN RGAIN BGAIN BGAIN 1. OUTDOOR RETURN RETURN --> OUTDOOR OUTDOOR RGAIN RGAIN BGAIN BGAIN 2. INDOOR RETURN RETURN --> INDOOR INDOOR RGAIN RGAIN BGAIN BGAIN 3. ONE PUSH RETURN RETURN --> ONE PUSH ONE PUSH RGAIN RGAIN... -
Page 11: 六）Color
FOUCS FOUCS --> --> SYSTEM SYSTEM --> COLOR COLOR --> IMAGE IMAGE --> RETURN RETURN --> OUTDOOR OUTDOOR F-RATE F-RATE 1080I50 RESET RESET Press the left arrow key to select different resolutions, and click PRSET to reset the system. COLOR （六）... -
Page 12: Note: If The Camera Cannot Be Used Normally Or The Parameters Are Abnormal, It Is Recommended To Restore The Default Values
Press the left arrow key to appear the following picture RETURN RETURN --> E-PLIP E-PLIP LR REV LR REV RREEZE RREEZE B＆W B＆W STAB STAB COL BAR COL BAR SRZ MOD SRZ MOD The preceding function options are in the OFF state by default. Note: If the camera cannot be used normally or the parameters are abnormal, it is recommended to restore the default values. - Page 13 ②CAMERA: Switches the address of the control camera, which must correspond to the dip switch of the camera. After the switch, you can set the camera. ③Auto focus button: You can directly use this key to control the one-button focus of the camera. ④Manual focus mode: Press this key to switch the camera's focus mode to manual focus mode.
-
Page 14: 五、Packing List
Steps to set preset points. ⑴Position the camera. ⑵Select one of the keys 1-9. ⑶Press the SET key to complete the setting. Invoke the preset point step： ⑴Select the prefab bit key that was set earlier. ⑵Press the CALL key and the camera lens will return to the preset position. Clear preset point step：... -
Page 15: Camera Control All-In-One Machine, Packing Case, Instruction Manual (Electronic File), Warranty Card, Certificate Of Qualification
Camera control all-in-one machine, packing case, instruction manual (electronic file), warranty card, certificate of qualification 六、After-sales service Dear users, in order to ensure that you fully enjoy the quality service, please carefully read the following product service regulations. The company provides limited warranty and lifetime repair service. 1.
Need help?
Do you have a question about the KD-C1000UH and is the answer not in the manual?
Questions and answers