Xiaomi MI Portable Electric Air Compressor 2 User Manual page 5

Needle valve adapter
Inflation
Valve Type
Adapter
Quick connect valve adapter
Valve Type
To deflate: Connect the quick connect valve adapter to the
Schrader valve and press the quick connect valve adapter down to
release the air.
Detecting air pressure
high-pressure air hose is connected to an item while the air
compressor is turned on.
Determining the correct air pressure
To ensure safety and to prevent injuries and property damage from
explosions due to over-inflation, please refer to the instructions or
relevant directions accompanying the item to be inflated before
inflating it, in order to determine the correct air pressure required.
Tires
To inflate balls like basketballs and
footballs, the included needle valve
adapter is needed.
To inflate: Screw the needle valve adapter
onto the Schrader valve adapter, then
insert the needle into the ball's valve to
start inflating.
To deflate: Insert the needle valve adapter
into the ball's valve to release the air.
Inflation
Adapter
The recommended inflation pressure of
tires for cars, bicycles, electric scooters
and motorcycles is indicated on the tire's
sidewall. The recommended inflation
pressures for car tires are also indicated on
the driver's side door jamb. For details of
recommended inflation pressures
concerning load weight, refer to your
vehicle's instructions or manual.
Tires on mountain bikes, e-bikes,
motorcycles, electric scooters, and
cars use a Schrader valve.
To inflate:
Connect the quick connect valve
adapter to the Schrader valve adapter
on the high-pressure air hose.
Connect the quick connect valve to the
Schrader valve and press the handle
down in the direction as shown in the
image to lock it and start inflating.
4