Hide thumbs Also See for Adapt:

Advertisement

DRAFT - FOR DEMO ONLY
Adapt™ Control Unit
QUICK REFERENCE GUIDE

KEYPAD CONTROLS

Power/Standby
Green LED: Power On
Amber LED: Standby
Immersion
Alternation
Therapy
Cycle Time
Microclimate
Assist™
Firm/Soft
Adjustment

OPERATING INSTRUCTIONS

1. Press and hold
standby mode.
2. Surface should automatically enter Autofirm mode. If not, press
inflate surface prior to patient transfer.
3. Surface will default to previous settings after 10 minutes.

SETTING MODE

Immersion: Press
firmness/softness by using
Alternation: Press
by pressing
. Adapt features 5-, 10- and 15-minute cycle times.
Change support surface firmness/softness by using
Adjustment may take up to 3 minutes.
Microclimate Assist is on by default for both therapy modes
(green LED). To toggle off, press
Autofirm
Max inflate for patient
transfer
Function Lockout
Amber LED: Locked
No LED: Unlocked
Alarm Silence
. Green LED indicates pump is on; Amber LED indicates
to select Immersion mode. Change support surface
. Adjustment may take up to 3 minutes.
to select Alternation mode. Select therapy cycle time
.
Power Failure
Warning
Low Pressure
Warning
.
to max

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Adapt and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for agiliti Adapt

  • Page 1 Alternation: Press to select Alternation mode. Select therapy cycle time by pressing . Adapt features 5-, 10- and 15-minute cycle times. Change support surface firmness/softness by using Adjustment may take up to 3 minutes. Microclimate Assist is on by default for both therapy modes...
  • Page 2 CPR/QUICK DEFLATION (Adapt Air™ and Adapt Hybrid™ only) 1. Locate red CPR valve at head of mattress. Turn valve for quick air release. 2. Detach hoses from control unit by pressing blue button and pulling connector from unit. PATIENT TRANSPORT (Adapt Air™...

Table of Contents