Trax TRH2027 Instructions

Version: T1
Button Commands
UP
STOP
DOWN
Channel(-)
(CH-)
TRH2027
15-Channel Remote
Technical specification
Battery: 3V (CR2450)
Working temperature: -10℃~50℃
-4°F~122°F
Warning
● Do not expose the remote to excessive moisture or water
● Do not strike or use excessive force on the remote
● If the remotes range is decreasing the battery may need to be replaced
● Only use CR2450 batteries in device
● If the voltage is less than 2.6V the remote will show a low voltage indicator
● Under uni-directional operating mode, pressing any button for more than
20s will stop radio signal transmission
● Under bi-directional operating mode, pressing any button for more than
5s will stop radio signal transmission
● Failure to follow these warnings may result in injury or render the remote
inoperable
● Always dispose of batteries properly
TRH2027
15-channel LCD Remote
Instructions
LCD
Channel(+)
(CH+)
To remove the back cover, use a tool such as a
sim card pin, mini screwdriver or paper clip.
Press down on the center of the hole on the
backside and simultaneously slide the cover
in a downward movement.
Battery life: >2 years
Transmitting power: 10 mW
Setting
button
Radio frequency: 433.05~434.79MHz
Radio range: 200 meters outdoor, 35 meters indoor
220 yards outdoor, 38 yards indoor
(P2)
TRH2027
Back