Safety/Instruction Decals - Toro CCR Powerlite 325 Operator's Manual

Safety/Instruction Decals

Important: Safety and instruction decals are located near areas of potential danger. Replace damaged decals.
94-2560
1. Cutting/dismemberment hazard, impeller—stay away from
moving parts; remove the key and read the instructions before
servicing or performing maintenance.
94-2561
1. Hot surface/burn hazard—keep bystanders a safe distance from
the machine.
1. Thrown object hazard—keep
bystanders a safe distance
from the snowthrower.
2. Cutting/dismemberment
hazard, impeller and
auger—stay away from
moving parts; remove the
key and read the instructions
before servicing or
performing maintenance.
104-4947
3. Engine—stop
4. On
5. Primer
6. Engine—start
3329-440 Rev A
4
94-2562
1. Cutting/dismemberment hazard, auger—stay away from moving
parts; remove the key and read the instructions before servicing
or performing maintenance.
94-2577
1. To engage the auger, hold the control bar against the handle.
2. To disengage the auger, release the control bar.
7. Warning—read the
Operator's Manual.
8. Warning—stop the engine
before leaving the machine.
9. Off
10. Choke