Step 3: Setting Up The Product - AmazonBasics B01NAVIJB4 Manual

• Following the arrows in the above illustration, reattach the cover to the enclosure.
• Connect the power adapter to the electronic socket and the power jack on the enclosure.
• Connect the USB cable to the enclosure and your computer. After connecting the enclosure to
your computer, the system should detect your hard drive.
• After finding the device, a mobile hardware prompt will be shown at the lower right corner of
computer and it will also be found in the disk management.
1NAVIJB4-AmazonBasics-3.5 inch USB 3.0 to SATA Hard Drive Enclosure-IM-V03 (EU).indb 5
Assembly
Step 3:
Setting Up the Product
Step 4:
5
7/6/17 10:28 AM