15.2 Changing the basic set-
tings
Set the programme selector to po-
1.
sition 1.
Press
Start / Reload and, at
2.
the same time, turn the pro-
gramme selector to position 2.
a The display shows the current
value.
Set the programme selector to the
3.
required position.
→ "Overview of the basic settings",
Page 32
To change the value, press
4.
ish in.
To save the changes, switch off
5.
the appliance.
16 Programme counter
The program counter displays the
number of finished programmes.
16.1 Calling up the pro-
gramme counter
Set the programme to position 1.
1.
Press
Start / Reload and set
2.
the programme to position 2 at the
same time.
Set the programme to position 5.
3.
17 Cleaning and servi-
cing
To keep your appliance working effi-
ciently for a long time, it is important
to clean and maintain it carefully.
17.1 Cleaning the drum
CAUTION
Risk of injury!
Permanently washing at low temper-
atures and a lack of ventilation for
the appliance may damage the drum
and cause injury.
Regularly run a programme for
▶
cleaning the drum or wash at tem-
peratures of at least 60 °C.
Leave the appliance to dry after
▶
every operation with the door
open, and leave the detergent
drawer to dry.
Run the
▶
gramme without laundry and with a
cleaning agent for caring for the in-
Fin-
side of the appliance or with wash-
ing powder that contains bleach.
17.2 Cleaning the detergent
Pull out the detergent drawer.
1.
Press down on the insert and re-
2.
move the detergent drawer.
Programme counter en
Drum Clean pro-
drawer
33