Advertisement
GENERAL SAFETY INFORMATION
The safety warnings and cautions provided on the product or in this operation manual must be observed.
Failure to observe these warnings and cautions provided to guard against hazards may result in injury
or accident. Read this operation manual carefully to familiarize yourself with its contents and ensure
that you can operate the product properly. Also, keep this manual in a safe place where it can easily be
referenced whenever required.
This manual uses the following symbols and terms in the warning and caution notices for preventing accidents
and protecting the safety of the customer and others.
This indicates a potentially hazardous situation which, if not heeded, may
WARNING
result in death or serious injury to you or others. Be sure to heed all warning
notices to ensure safe operation at all times.
This indicates a potentially hazardous situation which, if not heeded, may
CAUTION
result in a minor injury to you or others, or damage to property. Be sure to
heed all caution notices to ensure safe operation at all times.
This indicates cautions and recommendations for operation. It contains
NOTE
information which, if not heeded, may result in this product failing to function
properly. These notices also contain useful information for operation.
HANDLING THE PRODUCT
WARNING
1. Do not get this product wet or allow liquid inside. If water gets inside, stop using the product
immediately. Continuing to use the product under this condition may cause a fire or electric shocks.
2. Be sure to hold the connector when disconnecting the cable. Pulling on the cable may sever or
damage it and pose a risk of a fire or electric shocks from a short circuit.
CAUTION
1. Be careful not to drop the product when carrying it. Dropping the product may cause injury.
2. Ensure that all mountings are securely tightened. If a mounting becomes loose, parts may fall off
and cause injury.
3. Inspect mountings regularly (about every six months to one year) to ensure they are securely
tightened. If a mounting becomes loose, parts may fall off and cause injury.
NOTE
1. Striking or dropping the lens may cause the malfunction of the product.
2. This product is not waterproof. Take measures to avoid direct contact with rain, snow, or moisture.
Otherwise it may cause the malfuction of the product.
3. In dusty environments, cover the product when attaching or removing the product. If dust enters
inside, it may cause the malfunction of the product.
4. Before use in particular environments, such as places where chemical products are used, contact
your Canon sales representative or dealer. Otherwise it may cause the malfuction of the product.
BT1-D001-A-ENG
DEALING WITH ABNORMALITIES
WARNING
If any of the following situations occurs, immediately disconnect the power plug from the power
outlet and contact your Canon sales representative or dealer.
・Smoke, fumes, or unusual noises
・ Entry of foreign objects (such as liquid or metal objects) inside the product
MAINTENANCE AND INSPECTION
WARNING
Be sure to disconnect the cable and remove the lens from the camera before cleaning outside
of the lens. Do not use benzene, thinner, or other flammable substances to clean the product.
Otherwise it may cause a fire or electric shocks.
NOTE
Routine inspection about once a year is recommended, depending on the conditions and
environment of use. Request overhaul, if needed.
NOTE
Immediately wipe off any moisture on the lens from misty or foggy environments, using a dry
cloth. Seal the lens in a plastic bag with a desiccant (preferably new) to prevent moisture inside.
Otherwise it may cause the mold or the malfunction of the product.
TO THE CUSTOMER
1. Canon shall bear no responsibility for damage resulting from improper operation of this product by
the customer.
2. Canon shall make no guarantees about the product quality, functions, or operation manual
and its marketability and suitability for the customer's purpose. Moreover, Canon shall bear no
responsibility for any damage, direct or incidental, that results from usage for the customer's
purpose.
3. The product specifications, configuration, and appearance are subject to change without prior
notice.
4. For further information on repairs, maintenance, or adjustments not mentioned in this operation
manual, contact your Canon sales representative or dealer.
5. Note that Canon may be unable to undertake servicing or repair of a product if it is modified without
consulting Canon or your Canon sales representative.
CANON INC.
30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan
© 2022.04 CANON INC.
STORAGE
All rights reserved. No part of
this operation manual may be
reproduced or copied in any from
o r b y a n y m e a n s w i t h o u t t h e
written permission of Canon Inc.
3/3
Advertisement
