Timers And Locks - Philips 42PFL9703 Manual

5.7

Timers and locks

This section describes how to switch the TV on or
off at a specified time and to lock or unlock the TV.
5.7.1 Automatically switch to standby
Sleeptimer switches the TV to standby after a time.
‡ Press
MENU on the remote control and select
Features > Sleeptimer and press π to enter
the sleeptimer bar.
® Press o or œ to set the time up to 180
minutes in steps of 5 minutes. If set to 0
minutes, the Sleeptimer is switched off.
You can always switch off your TV earlier or reset
the time during countdown.
5.7.2 Automatically switch the TV on
(Not applicable in case of no Teletext present)
On timer switches the TV on automatically to a
specified channel at a specified time, from standby.
‡ Press
on the remote control and select
MENU
Features > On timer and press π to enter the
On timer menu.
® Use p or π, o or œ to select and enter the
menu items one by one to set a channel, a day
of the week or daily, and a starting time.
Ò Press
to confirm.
OK
† Press
to quit the menu.
MENU
à Tip
To switch off the On timer, select Off in the On
timer menu.
5.7.3 Lock TV channels and programmes
Lock TV channels and/or programmes from
connected devices to prevent children from
watching them. Lock and unlock with a four number
code.
Set or change your code
‡ Press
MENU on the remote control and select
Features > Set or Change code and press π to
enter your code.
® Enter your code with the number keys.
The Features menu reappears with a message
confirming that your code has been created or
changed.
Did you forget your code ?
‡ Select Change code.
18
® Press π.
Ò Enter the overriding code 8-8-8-8.
† Enter a new personal code.
º Confirm your new entered code.
The previous code is erased and the new code
is stored.
5.7.4 Activate or deactivate Child lock
If your code is set, you can lock all channels and
devices, lock a specific channel or device, set a time
after which all channels and devices are locked.
‡ Press
on the remote control and select
MENU
Features > Child lock and press π to enter
your code.
® Enter your code with the number keys.
Ò Select one of the options.
† Press π.
Lock or unlock all channels and connected devices
‡ Select Lock or Unlock.
Lock a certain programme or all channels from a
certain time
Child lock Custom lock
Lock Lock after
Custom lock Channel lock
Unlock
‡ Select Custom lock.
® Press π to enter the Custom lock menu.
Ò Press π again to enter the Lock after menu.
† Select On to switch on the Timer lock.
º Press p.
◊Select Time.
‹ Press π.
≈Enter the time with o or œ and π.
Ú Press
.
OK
Lock one or more channels and connected devices
‡ Select Custom lock.
® Press π to enter.
Ò Press o or œ to select Channel lock.
† Press π.
º Press o or œ to select the channel(s) you
want to lock or unlock.
◊Each time press
OK
channel.
to lock or unlock the
Use more of your TV