Timers And Locks - Philips 32PFL7862D User Manual

2690.1 en 18-09-2007
5.6.2 More on '7 or 8 day' EPG
Search by genre, scheduled reminders, etc. are
managed in the Programme guide menu.
‡ Press a on the remote control.
® Press Menu.
The Programme guide menu appears.
Programme guide What's on
What's on 12:30 South Today
Search by genre 11:50 Working Lunch
Preferred EPG ch...
13:00 In aller Freund
Acquire EPG data
Ò Press navigation key up or down to select a
menu option.
† Press navigation key right to enter.
º Press navigation key up or down to make a
selection.
◊Press
to activate or press the green key to
OK
watch
‹ Press a to quit the EPG.
rNote
Only channels marked as Preferred EPG channels
appear in the Programme guide menu.
22
16:50 Pagina 22
5.7

Timers and locks

This section describes how to switch the TV on or
off at a specified time and to lock or unlock the TV.
5.7.1 Automatically switch to standby
Sleeptimer switches the TV to standby after a time.
‡ Press Menu on the remote control and select
TV menu > Features > Sleeptimer and press
navigation key right to enter the sleeptimer bar.
® Press navigation key up or down to set the time
up to 180 minutes in steps of 5 minutes. If set
to 0 minutes, the Sleeptimer is switched off.
You can always switch off your TV earlier or reset
the time during countdown.
5.7.2 Automatically switch the TV on
On timer switches the TV on automatically to a
specified channel at a specified time, from standby.
‡ Press Menu on the remote control and select
TV menu > Features > On timer and press
navigation key right to enter the On timer
menu.
® Use navigation key left, right or up, down to
select and enter the menu items one by one to
set a channel, a day of the week or daily, and a
starting time.
Ò Press
OK to confirm.
† Press Menu to quit the menu.
à Tip
To switch off the On timer, select Off in the On
timer menu.
5.7.3 Lock TV channels and programmes
Lock TV channels and/or programmes from
connected devices to prevent children from
watching them. Lock and unlock with a four number
code.
Set or change your code
‡ Press Menu on the remote control and select
TV menu > Features > Set or Change code
and press navigation key right to enter your
code.
® Enter your code with the number keys.
The Features menu reappears with a message
confirming that your code has been created or
changed.
Use more of your TV