Table of Contents
Advertisement
04
08
A
B
A: 50 mm
B: 100 mm
Untitled-7 47
04
10
3. Attach the guide rails (04).
- Align the guide rail (04) with the
outermost imprints on the A/S jig-
sheet ref (08). Then, peel off the
double-sided tape on the guide rail
(04) and attach it to the A/S jig-sheet
ref (08).
- Make sure you do this step on both
the left and right sides.
NOTE
The guide rail (04) helps to position the
refrigerator in the intended spot.
4. Attach the T7 LEX foam (10).
- Attach the four T7 LEX foam (10)
pieces to maintain a gap between the
two refrigerators.
- Attach the four foam pieces on the
side of one refrigerator which is
adjacent to the other refrigerator.
- See the figure for the position of the
foam.
English
47
2021-11-29
6:09:55
Advertisement
Table of Contents
