Safety Warnings - fetra 3191 Operation Manual

Safety warnings

• The roller support and the mobile tilting stand may only be loaded
and used when the wheel stops (5) on the castors are secured.
• The working or supporting height may only be adjusted in unloaded
condition.
• When loading, observe the maximum capacity of 150 kg!
• Make sure to position the load always in the centre of the support roller or
of the mobile tilting stand.
Risks during usage – remaining risks
• There is a risk that the load may roll off from the support roller or the
mobile tilting stand as a result of pushing or gradients.
• Also, there is a risk that when operating the roller support or the
mobile tilting stand with lowered gravity limiters, the load my
slide or roll off sideways from the support roller or mobile tilting stand.
• Another risk may occur while shifting the load, when the end of the load
loses contact with the roller support or the mobile tilting stand and may
drop as a result. Always make sure to support the load at two points with
sufficient distance.
• The operator in his responsibility as machine operator must make sure that
no other persons are present in the device's working range and that he
can never lose control of the device's operation.
17
Transport equipment