Intended Use - fetra 3191 Operation Manual

Intended use

• The roller support is designed as a height-adjustable side unit for
supporting long materials at machines such as saws, presses, drills
etc. at indoor work places.
• The mobile tilting stand is designed as a height-adjustable extension
unit for boxes, wire boxes, etc. at indoor work places.
• Any usage that is not in line with its intended purpose is not permitted.
• The roller support and the mobile tilting stand must be used,
maintained and repaired in compliance with the specifications in this manual.
• Any other usage of the device is not allowed and may lead to injury or
damage.
• The roller support and the mobile tilting stand may not be used in
environments with fire or explosion hazard, extremely high dust
exposure or in corrosive environments.
• The devices should never be operated in lighting conditions below 50 Lux.
• The operating temperature should be between -10°C and +40°C.
• The ground conditions should be solid, level, free of holes, obstacles
and not prone to skidding.
• The lifting capacity specified on the type plate may not be exceeded.
• No unbalanced loads may be lifted.
14
Transport equipment